Skip to content

News · Japan manufacturing

Nippon Sanso adds a fourth O-18 water plant in Chiba

· Sources: 1 · Translated from the Japanese edition

Photo: Wilhelm Gunkel / Unsplash

Nippon Sanso said on November 19, 2026 that it will build a fourth production plant for oxygen-18 labelled water at the Sodegaura works of Chiba Sanso Center in Chiba prefecture. The company says the plant will be its largest yet, and that it is building it to meet rising world demand and to hold its position in that market. Completion is scheduled for 2029.

What the published specification covers

The product is sold as Water-18O at an enrichment of 98 atom% or more on an oxygen-atom basis, in glass septum vials of 20 g and 50 g. It is the feedstock for PET tracers, 18FDG among them. Enrichment is what the plant exists to do: oxygen-18 occurs at 0.2% in natural oxygen.

Separating oxygen isotopes is hard, the company says, because their physical and chemical properties are nearly the same. It developed an enrichment route based on cryogenic separation of oxygen and started large-scale production at 100 kg a year in 2004. The finished product is made under facilities and quality control aligned with ISO 9001, according to the company.

A feedstock whose supply base does not widen quickly

A second source for this material is not something a buyer can arrange on short notice. Enrichment needs a dedicated plant, and this one is years from completion. Nippon Sanso describes itself as the only maker in the world that handles the separation technology, plant construction and operation, and sales for O-18 water in one company.

It also says it already holds long-term supply contracts with several large customers, and that the added capacity is meant to secure supply before it opens new accounts. How an allocation is set against those contracts, until the new capacity arrives, is for a buyer to confirm.

The new capacity arrives in 2029, not before

Until the fourth plant is finished, three carry the load: 100 kg a year and 200 kg a year in Chiba, and 300 kg a year in Yamaguchi. The company calls that the largest capacity in the world even as it stands. Material for anything launching before the fourth plant opens has to come out of that envelope.

O-18 water is a stable isotope and can be held in stock. What cannot is fluorine-18, whose half-life is about 110 minutes, so a tracer like 18FDG is made close to where it is given and used within hours.

What to settle when sourcing O-18 water

Monthly volume, delivery interval and minimum order quantity go against the irradiation schedule. Together they decide how much material sits on site. On the incoming side, agree which items the certificate of analysis carries (enrichment, lot, manufacturing site) and which ones the receiving site verifies itself.

Lots will come from more than one of the four plants, so the notification terms for a change of manufacturing site are worth fixing in advance. Where GMP starts for a material like this is the manufacturer's call to make and to document, so a material sitting before that line is controlled by how the receiving site checks it. For anyone counting on the capacity that arrives in 2029, the terms are better settled early, the way a reserved CDMO slot is.

Sources

  1. New plant for O-18 water, the feedstock for PET diagnostic agents (Japanese). Nippon Sanso Corporation, Nov 2026.

Read this story in Japanese